Thermodur 600 Heat-Resistant Spray Paint (Up to 600°C)

Thermodur 600 is a heat-resistant aerosol paint designed to withstand temperatures up to 600°C. It is suitable for protecting and finishing metal surfaces exposed to high heat. The coating provides durable protection against heat, oxidation, and mechanical wear.

Suitable for applications such as:

• stoves and fireplaces

• exhaust pipes and flues

• barbecues and boilers

• other heat-exposed metal surfaces

Directions for Use

1. Ensure the surface is clean, dry, and free from grease.

2. Remove rust and loose old paint; sand if necessary.

3. Shake the can thoroughly for at least 2 minutes before use.

4. Spray in thin, even coats from a distance of 20–30 cm.

5. Do not apply thick layers, as this may cause cracking or peeling.

6. Allow to dry for at least 1 hour.

7. Final curing is achieved by heating (gradual temperature increase during use).

Important Information

• Full heat resistance is achieved only after curing by heat.

• During first heating, odour and smoke may occur – ensure adequate ventilation.

Safety Information

• Extremely flammable aerosol.

• Pressurised container – may burst if heated.

• Use only in well-ventilated areas.

• Avoid inhalation of vapours and contact with skin or eyes.

• Keep out of reach of children.