Centralheating cooker TEMY PLUS 18 grey righthanded 18kW

Equipped with circulation pump and safety valve. TEMY PLUS is a steel hot-water boiler with a cooking plate. Features: - TEMY PLUS is a steel hot-water stove-boiler for central heating with possibility to cook in the same time, produced according to EN 12809. It is very easy to use and maintain. - Boiler chamber is entirely made of steel, while the front parts are made of stainless steel AISI 314. The door frames are made of cast-iron. The upper door is made of fireproof glass, while the lower door is made of steel. The lower door has secondary air inlet for better combustion. - The flue opening is placed both on the upper side and on the lateral side of the boiler, so the customer can chose which one to use and which one to close. It is thus very easy to place the stove at the desired position in the kitchen and to align it with other household appliances. - Hot-water volume inside the boiler is high (up to 60 l) - the fact which guarantees functionality of the product as a central heating boiler. It has no insulation coating around, so that the heat radiation is spreaded toward the ambience directly (around 1 kW). The heat radiation toward the cooking plate is 1-2 KW. The rest is given to the central heating system. - TEMY PLUS P has the embedded automatic draught regulator provided. - Boiler can work only as a stove during the summer time (the grid to be set up on higher position inside the chamber, which is done easily and within a few minutes). - An embedded heat exchanger for thermal safety valve connection is provided (for devices such as Caleffi, Danfoss BVTS or Watts). Dimensions: 865x710x735 (mm) Nominal output 18 kW Watertank output 12 kW Weight 210 kg smoke tube on the side or on top 130mm, Flue outlet height from the floor to the axis 780mm Watertank capacity 40 l Color: grey Firechamber dimensions: H: 295mm D: 335mm W: 290mm Necessary draught 14pa Max working temperature 90?C Max working pressure 2,0 bar Upper and lower door 258x196mm Minimal distances to combustible material (according to EN 12815:2001/A1:2004/AC:2007) : back: 200 mm side: 200 mm front: 1000 mm