- A pellet stove with a unique design and elegant lines gives the look of the exclusivity of the space in which it is located.
- Stove made of thick sheet steel with steel sheet thickness of 3 mm.
- Special fireproof steel firebox that provides long service life.
- The components necessary for the functioning of the heating system are built into the product.
- Possibility of programming the stove operation on a weekly basis.
- Boiler made of boiler sheet
- Built-in safety thermostats prevent overheating of boiler water and self-ignition of the stove.
- Cleaning systems that make it easier to maintain the stove and provide reliable operation.
- Possibility of heating the hot water (in the boiler) and connection to the floor heating system.
- Pellet tank capacity 20 kg.
- Shell made of steel sheet 5mm and 3mm thick.
- Surface protection: painting (350 C) and varnishing (150 C).
- Product lifespan of 15-20 years.
|
Product: CFH XILA
|
|
|
Measurement Unit
|
Max.
|
Min.
|
|
Heating power
|
kW
|
17
|
6,1
|
|
Heating power output
|
kW
|
18,2
|
7
|
|
Heating power to water
|
kW
|
14,5
|
4,7
|
|
Heating power to ambience
|
kW
|
3.5
|
1,4
|
|
Efficiency
|
%
|
93.4
|
95.7
|
|
Emissions of CO (with 13% of oxygen)
|
%
|
0.0131
|
0,0074
|
|
Combustion gas temperature
|
°C
|
126
|
67
|
|
Gas mass flow
|
g/s
|
10,5
|
5,7
|
|
Minimumairflow pressure
|
Pa
|
12.0
|
10.0
|
|
Exhaust gases pipe diameter
|
mm
|
∅ 80
|
|
Combustion air inlet
|
mm
|
∅ 50
|
|
Water pipe diameter(inflow/return)
|
‘’
|
3/4 – 1
|
|
Maximum operating water pressure
|
bar
|
2
|
|
Maximum water temperature in the boiler
|
°C
|
75
|
|
Boiler capacity
|
l
|
25
|
|
Hopper capacity
|
kg
|
20
|
|
Fuel
|
-
|
Wood Pellet
|
|
Fuel hourly consumption
|
kg/h
|
3,91
|
1,31
|
|
Autonomy
|
h
|
5.11
|
15,26
|
|
Heatable volume*
|
m3
|
570
|
|
Rated electrical power
|
W
|
240
|
|
Supply voltage
|
V
|
230
|
|
Nominal frequency
|
Hz
|
50
|
|
Net weight
|
kg
|
90
|
|
Basic characteristics
|
|
The controlled combustion system with flue gases heat recuperation
|
Standard
|
|
Flue gases flow pressure control switch
|
Standard
|
|
Self-cleaning glass
|
Standard
|
|
Closed vessel mounting modification
|
Standard
|
|
One-way control via radio
|
Optional
|
|
Automatic reactivation in case of power failure
|
Standard
|
|
Five speed mechanical ventilation
|
Standard
|
|
Possibility to adjust power levels (5 levels)
|
Standard
|
|
Weekly programming
|
Standard
|
|
Two-way control via radio
|
Optional
|
|
GSM module
|
Optional
|
Dimensions: 1002x284x1088 mm
Diameter of the forge hood connection 80 mm
Diameter of the external air intake 50 mm
Maximum power 18,2KW
Maximum power by radiating 3,5 KW
Maximum power of the boiler 14,5 KW
Boiler volume 25l
Working water pressure is recommended to be 1 – 2 bars, ideally between 1.2 and 1.6 bar
Maximum consumption 3,91 kg/h
Degree of utilization with the maximum power 93 %
Minimum power 6,1 KW
Minimum power by radiating 1,4 KW
Minimum power of the boiler 4,7 KW
Minimum consumption 1,31 Kg/h
Heating volume 570 m3
Capacity of the funnel-shaped fuel tank 20 kg
Maximum operating time with a full tank 28,5 h
Voltage/frequency 230V/50Hz
Weight:
-Net 195 kg
-Gross 230 kg
Fluegas temperature 126°C
This stove is designed to combust fuel made of pressed wood mass (pellets with a diameter of 6 mm to 7 mm, length
of about 30 mm and maximum moisture of 8-9%)
Furnace has following built-in components:
-safety valve,
-circulating pump,
-automatic air vent valve,
-expansion tank and
-fill and drain cock
Safety distances to combustable materials:
back: 100mm
sides: left 50mm; right 800mm
front: 800mm
Stove ignition:
Cleaning and maintenance:
Possible problems and solutions:
About Us
Do Fireplaces Really Heat?